Adhesive mortar A 96
Adhesive-Regularizer with gray cement-based fibers for Fassatherm® Systems.
Features
Use
A 96 is used in external thermal insulation systems to glue and screed EPS boards cut from blocks or molded and rock mineral wool panels. It is also used to embed reinforcing meshes.
Preparation and application
Pour the product into the corresponding amount of clean water indicated in the Technical Data (22-24%) and mix by hand or with a low-speed mechanical stirrer until obtaining a homogeneous mixture, without lumps and with the desired consistency.
To glue the panels, apply the product on the entire surface or along the perimeter and in the central points, and place them in a staggered manner, making sure that they coincide perfectly with each other and then mechanically fix them with plugs.
Level the surface by embedding an alkali-resistant fiberglass mesh certified according to EAD 040016-00-0404, overlapping it by at least 10 cm at the joints. As a regularizer, A 96 can be applied by machine with FASSA, PFT, PUTZKNECHT, TURBOSOL, etc. plastering machines.
Completion must be carried out by applying a hydrosilicone, acrylic, acryl-siloxane or silicate-based coating after at least 2/3 weeks.