Natural fast cement
LAFAC natural fast cement is a very useful product in all types of construction due to its rapid setting (4-5 minutes). The manufacture of natural fast cement is the result of cooking natural products, without any kind of additives, to obtain a fast-setting product.
USES AND APPLICATIONS
Since the setting time and the resistance achieved are important, the use of LAFAC NATURAL FAST CEMENT is recommended for all types of masonry work.
LAFAC NATURAL RAPID CEMENT is a fast-setting product, so it is recommended to have the support clean and prepared for the application of the product, as well as the necessary tools for its application.
|Time (h)||Resistance (MPa)|
|Time (días)||Resistance (MPa)|
To obtain these resistances, the ambient temperature should not be lower than 10 ⁰C and not higher than 30 ⁰C.
LAFAC NATURAL RAPID CEMENT is a product with very good plasticity and great ductility, thus facilitating its implementation.
Given its characteristics, it is appropriate for use on any type of support (mortar, concrete, etc.).
The characteristics of the product may vary depending on the ambient temperature at the time of its application.
Keep out of reach of children.
Avoid contact with eyes and skin.
If the product is sprayed dry, on the eyes or skin, wash vigorously and go to an assistance center.
Wear appropriate gloves during application.
To prevent dust and splashes It is appropriate to wear safety glasses.
The product should be stored under cover in a clean, dry and well-ventilated place.
Consume preferably within 6 months from the packaging date.