shopping_cart
Cart
(0)
Quick brown plaster
€1.89
Tax included
Traditional hand-applied plaster characterized by its quality due to the high purity of the mineral used in its manufacture. It is a coarse-grained, fast-setting construction plaster. This plaster is classified as YG within the B1 family, and a manufacturing control system has been established in compliance with Standard UNE-EN 13279-1.
RECOMMENDATIONS FOR USE
Application temperature: Between +5ºC and +40ºC
The application time may vary depending on the amount of water used in the mixing process, ambient temperature, water pH, mixing method (manual or mixer), mixing time, and substrate type (concrete, ceramic, etc.).
It is applied manually and is used for masonry work such as securing screeds, making small repairs, securing partition walls, etc.
TECHNICAL CHARACTERISTICS
Water/gypsum ratio: 0.8
Potency time: 6-10 minutes
Hardness on substrate (Shore C): >=45 u
Flexural strength: >=2 N/mm2
Compressive strength: >=2 N/mm2
Approximate yield: 11.0 kg/m2/cm
1100000247
Data sheet
- Presentation format
- Bag of 17 kg
- Units per pallet
- 72
- Performance
- 11,0 kg/m2 per cm of thickness
Specific References
You might also like
8 other products in the same category:
Traditional hand-applied plaster characterized by its quality due to the high purity of the mineral used in its manufacture. It is a coarse-grained, fast-setting construction plaster. This plaster is classified as YG within the B1 family, and a manufacturing control system has been established in compliance with Standard UNE-EN 13279-1.