PROPERTIES

Aspect .......................................................... Crystalline solid
Color.............................................................. White
Useful chlorine content .................................... 90 %
pH (1%)......................................................... 2 - 3
Humidity......................................................... 0,30 %
Solubility........................................................ 1,2 grs./100 ml.

COMPOSITION

Active Ingredients (per 1,000 grs.) Trichloro - 1,3,5, - Triazinetrione Cl3(NCO)3

DOSAGE AND INSTRUCTIONS FOR USE

Initial Treatment: Add 10 grs. of product for each m³ of water. After 2 hours, adjust the pH of the water to between 7.2 and 7.6 using solid pH Minor or solid pH Plus.

Maintenance Treatment: With the pH of the water adjusted, add 1 to 2 g of product daily for each m³ of water. These doses are indicative and can be modified depending on the characteristics of each pool, weather, etc. The initial treatment (superchlorination) should be repeated whenever a lack of transparency is observed in the water. Introduce the necessary dose of product inside a skimmer, then putting the filtration equipment into operation, in order to be able to dissolve the product, as the water circulates through this skimmer. You can also distribute the dose of product on the surface of the pool equally. The addition of the product should be carried out preferably at sunset and without the presence of bathers in the pool water. Free residual chlorine should be between 0.5-2 mg/l. value that will be easily measured using a chlorine and pH analyzer kit. This control must be carried out a minimum of 2 times a day.