| PARA ENVÍOS FUERA DE MURCIA Ó ALICANTE, CONTACTAR POR TELÉFONO |
Murfor® is a prefabricated reinforcement consisting of two parallel wires joined by welding points to a continuous central wire in a zig-zag pattern, in the same plane.
It is sold by units of 3,05 meters in length.
Minimum breaking strength: 550 N/mm2.
Minimum yield strength: 500 N/mm2.
Minimum shear strength of the welding points: 2500 N.
The wires are corrugated to obtain a good adhesion to the mortar.
- Murfor® increases the compressive strength of masonry works, especially when dealing with eccentric loads.
- Murfor® increases the stiffness of the construction by connecting load-bearing and bracing walls and prevents progressive subsidence.
- Murfor® offers new architectural possibilities, for example:
Masonry without rigging. Impeccable work on both sides.
Replacement of concrete lintels.
Replacement of concrete tie chains.
Increased spacing between expansion joints.
The use of Murfor® in masonry work is very effective in preventing the formation of cracks. The main causes of cracks in masonry work are:
Overloading by bending, tensile or shear.
Shrinkage, shrinkage and expansion.
Differential settlements.
Earthquakes, vibrations, explosions.
Murfor® has a minimum thickness and is easy to lay in mortar joints. Thanks to the perfect parallelism of its wires and the choice of the right length of the elements, Murfor® is very easy to work with.
Murfor® is a prefabricated reinforcement consisting of two parallel wires joined by welding points to a continuous central wire in a zig-zag pattern, in the same plane.
It is sold by units of 3,05 meters in length.
