TABIGLAS grip paste
Plaster-based binder used as paste grip for joining large format ceramic partitions, plaster and cast.
It is a product made with plaster and mixed with a series of special additives to improve its workability and Adhesion to all surfaces for which it is designed.
Technical characteristics
Granulometry ≤ 200 μm
Use time 80-120 min
Water/Gypsum ratio 0.8-1 l/kg
Compliant Adhesion
Note: These values have been obtained in the laboratory, depending on the conditions, temperatures, pH of the water and a/y ratio and may vary.
Recommendations and instructions for use
Mix the product by sprinkling the plaster over the water, respecting the water/plaster ratio. Knead vigorously until it takes on a homogeneous, creamy and consistent appearance, ideal for laying the partition.
Material designed for the creation of prefabricated elements that also serves as a gripping paste. It can also be used as a review and finishing material.
Do not add additives on site, clean the supports of dust and foreign elements.
Use clean water with a temperature above 5º C and below 35º.