shopping_cart
Basket
(0)
White waterproof mortar
€4.36
VAT included
Calcisec Nature Enlucido is a decorative thin layer coating, based on lime, with a natural color from the stone itself, ideal for new works and rehabilitations.
Calcisec Nature Enlucido, is an ecological and respectful coating with the environment, which takes advantage of granulometries of colored aggregates that are usually discarded, thus contributing to a more sustainable construction.
Calcisec Nature Enlucido is a CR CS III W2 type mortar according to the UNE-EN 998-1 standard, for application in thicknesses up to 1 cm.
CHARACTERISTICS
- Exterior and interior thin layer coatings.
- Manual or mechanical application in thicknesses less than 1 cm.
- Application on previous rendering or in two layers.
- Waterproof and breathable.
- Decorative product.
- Smooth and floated finishes.
SUPPORTS AND INSTRUCTIONS FOR USE
- The supports on which to apply Calcisec Nature Enlucido must be resistant, stable, healthy, free of dust, other release agents, paint, etc. It will be conventional supports based on cement and brickwork.
- For supports with low absorption, high suction, or on a very smooth surface, use CALCISEC BASE.
- In case of high temperature, wind or on highly absorbent substrates, moisten the substrate beforehand, do not saturate it and wait for the surface water film to evaporate. Also moisten the coating for at least 24 hours after application to ensure proper curing.
- Add water starting at 20% and gradually modify this quantity, mixing manually or mechanically until a workable and homogeneous mixture is obtained.
- Apply the product on the support manually with a trowel with a maximum thickness of 1 cm. For greater thicknesses, apply the product in two layers, leaving the first layer rough, to have adequate adhesion for the second layer.
- Allow the necessary time to elapse and trowel.
TECHNICAL DATA
| Aspect | White powder |
| Granulometry | Continuous from 0 to 2 mm |
| Classification s/UNE-EN 998-1 | CR CSIII W2 |
| Compressive strength s/UNE-EN 1015-11 | 3,5 a 7,5 N/mm2 |
| Accession s/UNE-EN 1015-12 | (FP) A/B ≥ 0,3 N/mm2 |
| Water absorption s/UNE-EN 1015-18 | ≤ 0,2 kg/(m2 . min 0,5) |
| Water vapor permeability | μ ≤ 10 |
| Reaction to fire | Clase A1 |
| Approximate yield | 16 kg/m2 and cm thick |
8000103
Data sheet
- Presentation format
- Bag of 25 kg
- Units per pallet
- 56
Specific References
You might also like
8 other products in the same category:
Comments (0)
Calcisec Nature Enlucido is a decorative thin layer coating, based on lime, with a natural color from the stone itself, ideal for new works and rehabilitations.
Calcisec Nature Enlucido, is an ecological and respectful coating with the environment, which takes advantage of granulometries of colored aggregates that are usually discarded, thus contributing to a more sustainable construction.
Calcisec Nature Enlucido is a CR CS III W2 type mortar according to the UNE-EN 998-1 standard, for application in thicknesses up to 1 cm.