| PARA ENVÍOS FUERA DE MURCIA Ó ALICANTE, CONTACTAR POR TELÉFONO |
Setting activator additive for mortars, concretes and single-layer mortars. Ideal for achieving rapid demoulding, with high initial and final resistance, even in the face of frost or in the presence of or under water.
Additive that comes in liquid form and acts as an accelerator for the setting and hardening of mortars. Acelerais increases the rate of hydration and chemical reactions of cement constituents. Acelerais also acts as an antifreeze allowing work at low temperatures.
Acelerais is used when you want to achieve rapid removal of molds, mortars with high initial and final resistance, mortars for screeds that require rapid opening to traffic, work in cold weather or frost, mortars in the presence of water and even under water, etc.
Accelerate setting in single-layer mortars.
Do not use with metal armor.
Acelerais is added to the mixing water in the recommended proportion, incorporating the mixture in a concrete mixer.
It is recommended to use concrete and mortar rich in cement, and put it on site as soon as possible. (For concrete, minimum 350 kg of cement per 1 m3 of concrete).
Fresh cement must always be used to guarantee proper use of the product.
Do not use water with a surface layer of ice.
From 0.250 to 1 liters per bag of cement (50 kg).
Setting activator additive for mortars, concretes and single-layer mortars. Ideal for achieving rapid demoulding, with high initial and final resistance, even in the face of frost or in the presence of or under water.
